河北HPMC：關于咱們常常運用的可再渙散性乳膠粉，咱們知道可再渙散性乳膠粉于乳膠粉兩者之間的聯系嗎?要是不知道下面咱們就一同來看一下河北纖維素廠家是怎樣介紹乳膠粉與可渙散乳膠粉的聯系的，概況如下;

We often used for re-dispersible polymer powders , we understand redispersible latex powder on the relationship between the two polymer powders do ? Here we do not know if the look together is how manufacturers introduce Hebei cellulose polymer powders relationship with dispersible polymer powders , as follows ;

乳膠粉是經噴霧枯燥的渙散體，假如將這些乳膠粉攪到水中就會構成安穩的渙散液，其性質與本來的渙散液一樣。出產這些乳膠粉的難點是必須在高溫下將這些在室溫下就會構成接連膜，乃至是發黏的接連膜的渙散液轉變成流動性的粉體，因而，并不是一切的渙散液都可以轉變成可再渙散性乳膠粉的。

Latex powder is a spray-dried dispersion , if the latex powder stirred into the water will form a stable dispersion , the dispersion properties and the same original . Difficulties in the production of these polymer powders at high temperatures must be a continuous film which will be formed at room temperature , the dispersion or the continuous film into a tacky powder flowability , and therefore , not all of the dispersion can converted into a redispersible latex powder .

乳膠粉的效果處置 , 乳膠粉具有原渙散體一樣的效果，即在枯燥或固化過程中黏結顏料和填料，進步它們對有機或無機基材的黏結強度。這種水凝性黏結料例如水泥要有適當?shù)乃鸥晒袒偃邕@種黏結料施用得很薄，水分就會因被基材吸收或蒸騰而去掉，成果沒有滿足的水分進行水合效果，達不到滿足的強度。

The effect of latex powder processing , latex dispersion powder has the same effect as the former , i.e., pigments and fillers in the adhesive drying or curing process, to increase their organic or inorganic base to bond strength . That the hydraulic bonding material such as cement to have the right amount of water to cure , if such a very thin adhesive material applied , water will evaporate or be absorbed by the substrate and removed , the result is not enough water for hydration , reach sufficient strength.

增加可再渙散乳膠粉有兩層效果，首先是進步灰漿的保水性，構成一層膜削減水分的蒸騰，其次它還起額定的黏結效果進步灰漿強度。